Over time, we've learned the most commonly asked questions regarding Alcoa Wheels products. Below is our list of frequently asked questions along with answers.
We supply wheels and wheels accessories to original equipment manufacturers (OEM). Consumers can purchase Alcoa Wheels from our authorized wholesale distributors, retailers, truck dealers, trailer dealers, and tire dealers.
We supply wheels to original equipment manufacturers (OEM). Consumers can inquire pricing and availability of Alcoa Wheels from our authorized wholesale distributors, retailers, truck dealers, trailer dealers, and tire dealers.
Our Warranty information can be found on Page 1 of our Alcoa Wheels Service Manual..
If you think you have a warranty claim, please submit claim on line by filling out this form.
Bright, non-reflective surface on both sides
Designated by 0 or 9 in the 6th digit of the part number
Its reflective finish and high gloss levels give the wheel an appearance that redefines the standard in wheel finishes
Designated by 7 or 8 in the 6th digit of the part number
The premium wheel with highest level of gloss and reflectivity on the market
Designated by 1, 2, or 3 in the 6th digit of the part number
More information found here
Dura-Black - Designated by BLK at the end of the part number
Dura-Bright® - Designated by DB at the end of the part number
Dura-Flange® - Designated by DF at the end of the part number
Dura-Flange® with Dura-Bright® - Designated by DD at the end of the part number
Prior to applying cleaning products verify the wheel is at ambient temperature. Apply an approved aluminum wheel cleaner intended for aluminum wheels over the surface of the wheels, inside the hand holes, and around the stud holes. Agitate the cleaner with a soft-bristle (non-metallic) brush, periodically while applying water. Scrub the surfaces of the wheel including inside the hand holes and bolt holes. If the tire is removed scrub the wheel drop center with all-purpose cleaner and a stiff-bristle brush. Rinse wheel thoroughly with clean water. Repeat these steps if necessary. See TMC RP 267 Cleaning Wheels.
For non Dura-Bright® wheels use a non-abrasive aluminum polish. After you polish the wheel up to the way you want it to look like, apply a coat of car wax on to help seal up the polish.
Alcoa Wheel Service Manual 2017 page 5, section 3-2 “Alcoa Wheels does not approve of any form of alteration to wheels except minor cosmetic buffing for appearance purpose.”
Alcoa Wheel Service Manual 2017 inside front page – Limited Warranty – (d) “Changing the original condition of the Wheel by alteration or by subjecting it to any processing” – voids the warranty.
No. Alcoa Wheels should not be painted or otherwise coated in any way that may interfere with the mounting surfaces. See Alcoa Wheel Service Manual section 3-2.
Our manufacturing process is such that we only ship and sell a finished product. The wheel is an extremely engineered component and there is a lot behind it to meet the required safety guidelines. With that in mind, we do not make custom orders and we do not sell an unfinished product. Please see the bulletin regarding the modification and alteration of our wheels.
Alcoa wheels are identified with a stamp that shows the country of origin, wheel load rating, maximum inflation pressure, date of manufacture Month/Day/Year, part number, wheel description and DOT marking designation. Alcoa Wheel identification is usually located 180 degrees from the valve stem on the open side of the wheel. Wheel identification is required by the DOT must be legible. Wheels should be taken out of service if this identification is not legible and scrapped. See 3-12 Identification Section in Alcoa Wheels Service manual online version page 13.
Historically our product labels included a combination of wheel technology and finish names.
Starting with 2020 production, the labels will designate finish names only.
The wheels are identified with one label that identifies the finish of the wheel: Brush Finish, High Polish, Mirror Polish, Dura-Bright. If the wheels have Dura-Flange treatment, an additional label with Dura-Flange is applied.
In addition, all wheels have the heat indicator label.
You can find out by reading the part number on the roll stamp on the wheel. Alcoa Wheel roll stamp is usually located 180 degrees from the valve stem on the open side of the wheel. Example part number ULT391DB. The 6th digit identifies the finish of the wheel. The 7th & 8th digit identifies the surface treatment of the wheel. This is a Mirror Polish Outside Only with Dura-Bright Surface Treatment. See question 5 to learn about the different finishes and surface treatments.
Complete this form only if you have been directed to do so by Howmet Aerospace.
The Supplier Worksheet is not for prospective suppliers. If you have not been asked by a representative of Howmet Aerospace to register as a new supplier, you will not be contacted.
We are not looking to expand the distribution network right now.
For your information, some criteria include buying a minimum quantity of 5,000 wheels a year and ordering in large quantities at a time. We hope that you find the products you need through our current wholesale distribution network found here on our website.
Thanks for your interest in a career at Howmet. We don't accept email applications, but we do provide several web sites worldwide for online application. Click here to visit our list of global job listing sites. Best of luck!
Our wheel experts are addressing topics on all things axle ends. Transcripts are available as well.
If you cannot find your answers on this page, please fill out our contact us form. A company representative will contact you to help with your inquiry within 48 hours.