close
close

88267 - Hub Piloted 22.5" x 8.25" on 285.75mm bolt circle

Finish Part Number
Dura-Bright®
Brushed Both Sides
882670DB
Dura-Bright®
Mirror Polish Outside Only
882671DB
Dura-Bright®
Mirror Polish Inside Only
882672DB
Dura-Bright®
Mirror Polish Both Sides
882673DB
Dura-Flange® Wear Protection
Mirror Polish Outside Only
882671DF
Dura-Flange® Wear Protection
Mirror Polish Inside Only
882672DF
Dura-Flange® Wear Protection
High Polish Both Sides as applicable³
882677DF
Dura-Bright® and Dura-Flange® Wear Protection
Mirror Polish Outside Only
882671DD
Dura-Bright® and Dura-Flange® Wear Protection
Mirror Polish Inside Only
882672DD
Dura-Bright® and Dura-Flange® Wear Protection
Mirror Polish Both Sides
882673DD
Mirror Polish Outside Only882671
Mirror Polish Inside Only882672
Mirror Polish Both Sides882673
High Polish Both Sides as applicable³882677


Specifications Measurement
Size22.5 x 8.25
Bolt Circle285.75
Hub Bore Diameter220.19
Bolt Hole Diameter26.75
Max. Wheel Load13357
Wheel Weight19
Outset2167.64
Inset147.32
Max. Inflation – cold896
Valve StemTR554D
Stabilizer8864


Accessories & Mounting Hardware Part Number
Front Outer Cap Nuts -
Rear Inner Cap Nuts Al/Al -
Rear Inner Cap Nuts Al/Stl -
Rear Outer Cap Nuts -
Hub Cover SystemHub covers: Front - 076188 or 076185 Rear - 077188 or 077185 One-Piece hub cover system: Front - 088100S, Rear - 089100S
Hug-A-Lug®1811


Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.

1. Capacity ratings as dual or single in highway service – bias-ply or radial.
2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset).
3. Clean Buff Inside Only finish for products 822627, 84U627. Clean Buff Outside Only finish for products 824627, 834627, 89U637.

Contact Information

Email

close